 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EL1511C - Product Brief EL1511C - Product Brief Medium Power Differential Line Driver Features * Drives up to 360mA from a +15V supply * 16VP-P differential output drive into 25 and 20VP-P differential output drive into 100 * -85dBc typical driver output distortion at full output at 150kHz * Low quiescent current of 3.5mA per amplifier at 1/2-IS current mode * Disable down to 1.5mA General Description The EL1511C is a dual operational amplifier designed for customer premise line driving in DMT ADSL solutions. This device features a high drive capability of 360mA while consuming only 7.5mA of supply current per amplifier and operating from a single 5V to 15V supply. This driver achieves a typical distortion of less than -85dBc, at 150kHz into a 25 load. The EL1511C is available in the thermallyenhanced 16-pin SO (0.150") and a 16-pin LPP (4x4mm) packages. The EL1511C is specified for operation over the full -40C to +85C temperature range. Electrical characteristics are given for typical 12V supply operation. The EL1511C has two control pins, C0 and C1, which allow the selection of full IS power, 3/4-IS, 1/2-IS, and power-down modes. The EL1511C is ideal for ADSL, SDSL, and HDSL2 line driving applications for single power supply, high voltage swing, and low power. The EL1511C maintains excellent distortion and load driving capabilities even in the lowest power settings. Applications * * * * * ADSL CSA line driving ADSL full rate CPE line driving G.SHDSL, HDSL2 line driver Video distribution amplifier Video twisted-pair line driver Ordering Information Part No EL1511CS EL1511CS-T7 EL1511CS-T13 EL1511CL EL1511CL-T7 EL1511CL-T13 Package 16-Pin SO (0.150") 16-Pin SO (0.150") 16-Pin SO (0.150") 16-Pin LPP 16-Pin LPP 16-Pin LPP Tape & Reel 7" 13" 7" 13" Outline # MDP0027 MDP0027 MDP0027 MDP0046 MDP0046 MDP0046 Connection Diagram 16 OUTA VOUTA 2 VIN-A 3 GND* 4 GND* 5 VIN+A 6 GND 7 VS- 8 + - + - 15 VOUTB 14 VIN-B 13 GND* 12 GND* 11 VIN+B NC 1 INA- 2 INA+ 3 GND 4 13 OUTB 12 NC 11 INB10 INB+ 9 C1 C0 8 NC 1 16 VS+ Amp A + Power Control Logic NC 5 NC 6 VS- 7 Power Control Logic 10 C1 9 C0 14 VS+ 15 NC Amp B + November 28, 2001 EL1511CL (16-Pin LPP Top View) EL1511CS [16-Pin SO (0.150")] * These GND pins are heat spreaders Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a "controlled document". Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation. (c) 2001 Elantec Semiconductor, Inc. EL1511C - Product Brief EL1511C - Product Brief Medium Power Differential Line Driver General Disclaimer Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the circuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement. WARNING - Life Support Policy November 28, 2001 Elantec Semiconductor, Inc. 675 Trade Zone Blvd. Milpitas, CA 95035 Telephone: (408) 945-1323 (888) ELANTEC Fax: (408) 945-9305 European Office: +44-118-977-6020 Japan Technical Center: +81-45-682-5820 2 Elantec, Inc. products are not authorized for and should not be used within Life Support Systems without the specific written consent of Elantec, Inc. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death. Users contemplating application of Elantec, Inc. Products in Life Support Systems are requested to contact Elantec, Inc. factory headquarters to establish suitable terms & conditions for these applications. Elantec, Inc.'s warranty is limited to replacement of defective components and does not cover injury to persons or property or other consequential damages. Printed in U.S.A. |
Price & Availability of EL1511C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |